Raymarine Quantum 2 CHIRP Radar with Doppler Collision Avoidance Technology

Introducing Raymarine Quantum 2 Radar with Doppler collision avoidance technology. 

The Quantum 2 next generation CHIRP pulse compression radar by Raymarine provides superior target awareness at both long and extremely short ranges.

Using advanced Doppler processing, the system instantly highlights moving radar contacts and colour codes them to indicate whether they are inbound or outbound. 

Quantum with Doppler makes it easy to discern potentially dangerous targets when navigating in high-traffic areas.

Like every Raymarine Quantum system, you’ll also benefit from a rugged and lightweight design that is super-easy to install.

Quantum 2 has very low power consumption making it especially friendly to vessels running exclusively on battery power.

Quantum 2 with Doppler can be installed in a traditional wired configuration, or use its built-in Wi-Fi technology to connect it to your Raymarine MFD.

The Quantum 2 with Doppler truly sets the standard for on the water safety and collision avoidance.

Features

• Doppler moving target display allows for superior situational awareness at-a-glance.
• Fully automatic ARPA target tracking, along with manual MARPA mode.
• Adjustable TrueTrails target history shows the motion history of moving contacts.
• CHIRP Pulse Compression detects contacts as close as 18-feet for zero-visibility navigation.
• 24-mile range for early detection of traffic, navigation aids, landfall and weather.
• Immediate awareness – Quantum starts up and is ready to go in seconds.
• Superior interference rejection eliminates noise from other radars.
• Simplified installation with Wi-Fi or thin wire network connectivity.
• Easy upgrade – Quantum 2 fits the same bolt pattern as other Raymarine scanners.
• Lightweight and easy to install – Quantum weighs up to 50% less than comparable magnetron radars.
• Safe emissions – mount Quantum anywhere onboard
• Low power consumption for extended battery life under sail.

Specifications

• Dimensions: Diameter | Height 541.0 mm | 209.5 mm
• Weight: 5.6 kg
• Supply voltage: Either 12 V dc or 24 V dc nominal
• Minimum: 10.8 V dc | Maximum: 31.2 V dc
• Power consumption: Transmit mode (maximum): 17 W | Standby mode: 7 W | Sleep mode (applies only to radars connected via Wi-Fi): 2 W
• Waterproofing: IPX6
• Operating temperature range: -10°C to +55°C
• Storage temperature range: -25°C to +70°C
• Additional storage conditions: Store upright; do not block vents on underside
• Humidity: Up to 95% at 35°C
• Maximum wind speed: 100kts

Transmitter

• Type: X-band solid-state transmitter with pulse compression technology
• Transmit frequency: 9354 MHz to 9446 MHz
• Peak power output: 20W
• Duplexer: Circulator
• Pulse widths (3 dB): 40 ns to 14.7
• Chirp lengths: Chirp lengths: 400 ns to
• Pulse reptition frequency: 2083 Hz
• Chirp bandwidth: Up to 32MHz
• Standby mode: Scanner rotation - OFF | Scanner transmission - OFF | Wi-Fi link - ON

Antenna

• Type: Patch array
• Beamwidth (nominal): Horizontal: 4.9° | Vertical: 20°
• Polarization: Horizontal
• Rotation speed: 24rpm nominal

Doppler

• Target Tracking: Tracking of 10 simultaneous MARPA and / or ARPA targets (with Doppler-assisted ARPA)
• Target Filtering: True Motion mode identifies only those objects that are moving relative to the vessel

Compatibility

• Radar Type: Quantum 2 with Doppler
• MFD Compatibility Axiom and Axiom Pro
• Perfect for Sailboats, RIBs, and smaller powerboats
• Type Solid State CHIRP Pulse Compression with Doppler target tracking
• Range Performance 24NM
• Performance Lightweight and easy to install. Excellent short and long range performance. Detect targets as close as 18ft
• Automatic Bird Mode No
• MARPA Target Tracking Yes

In The Box

• Quantum 2 radome
• 10m (32.8ft) power cable
• M8 mounting bolts with spring washers and flat washers
• Documentation pack (including mounting template)