FixTech FS200 Low Modulus Silicone Black 310ml

FS200 is a high strength multi-blended unique moisture curing silicone 100% UV resistant and suitable for the harsh marine environment for the fixing and sealing of organic and non-organic window panels, which is glass, acrylic, Perspex etc.

It is easy to gun and apply, and unaffected by weather ability conditions such as sunlight, UV-radiation, rain and temperature extremes, and its high movement capability suits both organic and inorganic panels.

FixSil FS200 thanks to its consistency shows excellent non-sagging properties even when applied in thick layers.

The applied product is easily smoothed out and, once polymerised, does not crack, and does not chalk like Polyurethane sealants.

It offers a good resistance to ageing, to atmospheric agents, to salt and fresh water and UV rays.

Characteristics

• Very easy application
• Permanent colour, UV-resistant
• Stays elastic after curing
• Very good adhesion on many materials
• Almost no smell
• Slow skinning time – therefore ideally suited for long joint runs

Applications

• Acrylic, Perspex and other polymer based window systems and glass adhesion and sealing applications
• Suitable for marine exposure
• Suitable for joints in building curtain walls

Technical Characteristics

• Base: Polysiloxane
• Consistency: Stable Paste
• Curing System: Moisture Cure
• Skin Formation: Ca. 15-20 min. (20°C/65% R.H.)
• Curing Rate: 1,5-2mm/24h (20°C/65% R.H.)
• Hardness: 20±3 Shore A
• Shrinkage: None
• Specific Gravity: 1,03g/ml
• Temperature Resistance: -40°C to +150°C
• Elastical Recovery: >80%
• Maximum allowed Distortion: 25%
• Elasticity Modulus 100%: 0,35N/mm² (DIN 53504)
• Maximum Tension: 1,00N/mm² (DIN 53504)
• Elongation at Break: 600% (DIN 53504)