Altex Epoxy Barrier Undercoat 1.25L

Altex Yacht & Boat Paint Epoxy Barrier Undercoat is a high performance, sandable epoxy high build coating which is both very corrosion and water resistant.

Epoxy Barrier Undercoat is recommended for:

• Topside & Superstructure final sealing to provide an optimum surface for finish coating.
• As a high build surfacer to remove defects and achieve a finish suitable for application of Altex Polyurethane Undercoat or one of the Elite Polyurethane finish coats.
• As a high build barrier coat for below waterline application, used as part of an Altex Antifouling system.
• Direct application to sanded GRP, epoxy laminated wood and epoxy sealed wood.
• Direct application to epoxy faired surfaces.
• Application over Altex Epoxy Primer or Altex High Build Surfacer.
• Priming / undercoating over degreased & sanded aged polyurethanes, epoxies, fairing systems, gelcoats, epoxy laminates & fibreglass.

Advantages

• Excellent build properties up to 150µm DFT in a two pass application.
• Excellent surfacing and sanding properties.
• Very good corrosion protection.
• Wide maximum self re-coat times for easy project management.
• Very good water and chemical resistance.
• Epoxy Barrier Undercoat may be top-coated with both acrylic or polyester urethane finishes and is specially formulated as an undercoat or sealer under the Altex Elite® range of polyurethane finish coats.
• May be used as a high build surfacer / undercoat for top coating with Altex Polyurethane Undercoat.
• May be used in immersion service as part of an Altex Yacht & Boat recommended system.

Specifications

• Coating Type: Phenalkamide Epoxy
• Colour: Off-White
• Size: 1.25L
• Mix Ratio: 4 to 1 by volume
• Gloss: Low Sheen
• Thinner: Spray: Altex Thinning Solvent #12
• Brush/Roller: Altex Thinning Solvent #22